Certification of Products
GL checks for you
Do you know how to achieve the required approval and certificates for Exhaust Emission Measurements? Do you know how to measure the performance of your transport refrigeration units? GL provides technical assistance, test laboratories, type approval and more.
Combustion engines environmental
Exhaust emission approval and certification: rely on GL's experience. We shed light on the complex issue of the applicable air pollution prevention legislation, for instance the IMO MARPOL 73/78 Annex VI and NOx Technical Code, the RVIR (Rhine Vessel Inspection Regulation (Chapter 8a)), the NRMM (EU Non-Road Mobile Machinery) according to 97/68/EC amended by 2004/26/EC, the RCD (Recreational Craft Directive) according to 94/25/EC amended by 2003/44/EC, the BSO (Lake Constance Shipping Ordinance (Bodenseezulassung)) and other EC regulations.
In due time we provide guidance on how to achieve the required approval and certificates for exhaust emission measurements and chemical analysis, exhaust emission measurements on test beds according to relevant legal requirements (e.g. IMO, RVIR) or based on the international standard series ISO 8178. Furthermore, GL offers appropriate investigations on board ships. The GL exhaust laboratory is accredited according to DIN EN ISO/IEC 17025:2000.
Contact: Exhaust Emission Certification
Contact: Exhaust Emission Measurements
Pressure equipment
The "Pressure Equipment Directive 97/23/EC (PED)" governs the pressure equipment manufacturing and its placing on the EU market. It applies to vessels and assemblies, piping, safety and pressure accessories exposed to a maximum allowable pressure exceeding 0.5 bar. Depending on the level of hazard, the pressure equipment is to be classified into categories which determine the conformity assessment procedure and hence the scope of testing. GL is accredited as a notified body (identification no. 0098) and certifies all types of pressure equipment, such as heat exchangers, pressure vessels and steam boilers, considering several applicable codes and standards.
For gas cylinders (bottles, receptacles) and tank containers, GL is accredited to the "Transportable Pressure Equipment Directive 1999/36/EC (TPED)".
Furthermore, air locks and components of tunnelling machines according to applicable standards will be performed.
Contact: Pressure Equipment
Certification of containers
More and more containers nowadays are owned by shipping companies, and fewer by leasing companies. GL conducts container inspection and certification services for newbuildings and in-service containers, type testing, certification of manufacturing and supervision of manufacturing in accordance with the owners' specification. GL makes sure that the highest possible standards are maintained in design and testing. We approve and authorise manufacturers and repair workshops and assure quality services in a vital field. Use the GL expertise, because in a tough contest you need all the support you can get.
Contact: Container Certification
Certification of tank containers
ISO-tank containers, swap tanks or other portable tanks – whatever kind of tank you have, GL can perform all the inspections you need. Liquids, gases and solids, dangerous or non-dangerous cargoes or foodstuff – whatever kind of cargo is transported in your tank, GL can test its suitability and safety. We test and inspect regular conditions and damages, repairs and modifications. GL provides technical assistance and type approval of your equipment.
Contact: Tank Container Certification
Coating systems for ballast water tanks
The Performance Standard for Protective Coatings (PSPC) applies to ballast water tanks on all types of newbuildings. "GL CeCoBW" is the certificate that proves a manufacturer's ballast water tank coating system complies with the IMO PSPC requirements. As a maritime specialist, GL offers you testing, type approval and certification. Benefit from our long-term experience in approval of coatings and from our web-based database of certified coating systems. Please also see "Protective Coatings" under "Ship Newbuilding/Safety & Environment".
Contact: Corrosion Protection
MED - Marine Equipment Directive
MED applies to equipment listed in Annex A.1 of the Directive: life-saving appliances, marine pollution prevention equipment, fire protection equipment, navigation equipment and radio communication equipment is to be placed on board according to international conventions. According to the MED, a conformity assessment procedure has to be performed to obtain the "Mark of Conformity". This is required for equipment placed on board any EU member state's ship and ships of countries which have agreed to apply the MED.
A manufacturer has to gain the conformity assessment for one type of equipment by only one notified body. It reduces costs for manufacturers, who no longer have to produce multinational versions of their equipment. There is a multiple choice of conformity assessment procedures. If the equipment is within the scope of the Mutual Recognition Agreement between the EU and the USA, the manufacturer may also apply for the issuing of a US Coast Guard Approval Number.
Contact: MED Coordination
EU directives for industrial products
EU directives for which the CE marking is mandatory
| Title of the Directives |
Directive No. |
|
Simple Pressure Vessels |
87 / 404 / EEC |
|
Personal Protective Equipment |
89 / 686 / EEC |
|
Transportable Pressure Equipment |
1999 / 36 / EC |
|
Pressure Equipment |
97 / 23 / EC |
|
Marine Equipment |
96 / 98 / EC
98 / 85 / EC
2001 / 53 / EC
2002 / 75 / EC |
|
Electromagnetic Compatibility |
89 / 336 / EEC
92 / 31 / EC |
|
Active Implantable Medical Devices |
90 / 385 / EEC |
|
Medical Products |
93 / 42 / EEC |
|
Recreational Craft |
94 / 25 / EC
2003 / 44 / EC |
